Product Features:
- Liquid chelating agent.
- Helps prevent staining from iron, copper and manganese.
- Helps remove fresh stains.
- Eliminates water discolouration from oxidised metals.
- High levels of chlorine (in excess of 5.0 ppm) can break down product.
- When used according to label instructions, product may remain effective for up to 4 weeks.
Benefits:
- Prevents discoloured water.
- Prevents soluble metals from changing states and causing stains.
- Removes unsightly staining.
Application Instructions – Metals in Water and Prevention of Stains:
- Do not add this product if the chlorine or bromine residual exceeds 5.0 ppm. If the pool has been shocked, wait 24 – 48 hours before applying this product to obtain maximum effectiveness.
- Backwash the filter, then allow the pump to run continuously.
- Apply 250 mL of Pool Magnet per 10,000 litres for every 1.0 ppm of metals present. Maximum recommended dose is 750 mL per 10,000 litres. If staining is present, add product directly over these stains. Temporary clouding may occur upon addition.
- Do not superchlorinate or allow the chlorine or bromine residual above 5.0 ppm for 5 – 7 days after applying Pool Magnet.
- If the total amount of metals present exceeds 1.0 ppm, apply Quick Clear to assist in metal removal.
Application Instructions – Removal of Fresh Stains:
- Do not add this product if the chlorine or bromine residual exceeds 5.0 ppm. If the pool has been shocked, wait 24 – 48 hours before applying this product to obtain maximum effectiveness.
- Turn the circulation pump off for 8 hours.
- Slowly and as close to the surface of the water as possible, pour 250 – 750 mL (depending on severity of stains) of Pool Magnet directly in the area of the stain. Pouring the required dose down a piece of poly pipe is a good way of directing Pool Magnet onto stains on the floor of the pool.
- Do not swim or operate pump for 24 hours.
- After the waiting period, turn the pump back on to circulate the water and brush the pool for 5 – 7 days.
- Use Quick Clear in the filter to aid in the removal of redissolved metals.
Application Instructions – Maintenance:
- When top-up water contains metals, add 25 mL of this product per 10,000 litres once a week.
Available Sizes:
- 1-litre bottles
NOTE: Avoid physical contact with product. Follow safety information on label Instructions. Store in a cool, dry place. Keep out of the reach of children.
