Power Chlor is a revolutionary patented product that provides an economical source of chlorine for the routine sanitation and periodic oxidation of pools. The multifunctional co-compacted granules dissolve completely and are designed for use with all types of pool surfaces. Each Power Chlor granule contains trichlor for killing algae and bacteria, chlorine-tolerant clarifiers for keeping water crystal clear, and water-enhancing agents to provide a silky smooth feel to the water whilst reducing skin and eye irritation.
To use Power Chlor – Start-up:
- Adjust pH to 7.4 – 7.6.
- Slowly pour 120 grams of Power Chlor per 10,000 litres into the skimmer with the pump running in normal filtration mode.
- After 1 hour, test the chlorine residual and, if necessary, repeat the dosage until the free chlorine residual is between 1.5 and 3.0 ppm.
- If this level is exceeded, do not allow bathers to re-enter the pool until the chlorine residual drops to 5.0 ppm or less.
To use Power Chlor – Routine maintenance:
- Adjust pH to 7.4 – 7.6.
- Slowly pour 20 grams of Power Chlor per 10,000 litres into the skimmer with the pump running in normal filtration mode.
- After 1 hour, test the chlorine residual and, if necessary, repeat the dosage until the free chlorine residual is between 1.5 and 3.0 ppm.
- If this level is exceeded, do not allow bathers to re-enter the pool until the chlorine residual drops to 5.0 ppm or less.
To use Power Chlor – Shock:
- Slowly pour 120 grams of Power Chlor per 10,000 litres into the skimmer with the pump running in normal filtration mode.
- Do not allow bathers to re-enter the pool until the chlorine residual drops to 5.0 ppm or less.
To use Power Chlor – Visible algae:
- With the pump running, brush algae from all pool surfaces.
- Slowly pour 120 grams of Power Chlor per 10,000 litres into the skimmer with the pump running in normal filtration mode.
- If live algae remains after 24 hours, repeat the treatment.
- Do not allow bathers to re-enter the pool until the chlorine residual drops to 5.0 ppm or less.
- For best results, use in conjunction with MSA II Algaecide.
To use Power Chlor – Off-Season:
- Slowly pour 120 grams of Power Chlor per 10,000 litres into the skimmer with the pump running in normal filtration mode.
- Repeat as often as is necessary to maintain a chlorine residual of at least 1.0 ppm.
- For best results, use in conjunction with Back-Up II Algae Inhibitor.
NOTE: Avoid physical contact with product. Follow safety information on label instructions. Open in well ventilated area. Avoid breathing fumes. Store in a cool, dry place. Keep out of the reach of children.
