BioGuard Filter Brite

Filter Brite is an alkaline filter cleaner that removes scale, rust and other deposits from filters. It can be used with all filter types. Regular use lengthens the life of the filter media, and helps keep the water sparkling and clear. Cleaning the filter chemically with Filter Brite lengthens filter runs and promotes better filtration. It can reduce maintenance costs and may reduce chemical use by improving water circulation. Use Filter Brite on filters for chlorinated or brominated pools at least twice a season to control the accumulation of scale and rust.

To use Filter Brite:

DE and Cartridge Filters:

  1. Turn off the pump.
  2. Remove elements or cartridge from the filter housing and rinse off loose debris with a garden hose.
  3. Mix 1 bag (250 grams) of Filter Brite in a minimum of 10 litres of clean water in a bucket.
  4. Soak elements or cartridge for at least 6 hours and preferably overnight.
  5. Rinse the elements thoroughly with a garden hose and replace in the filter.

Sand Filters:

  1. Backwash the filter thoroughly, then turn off the pump.
  2. Dissolve 1 bag (250 grams) of Filter Brite in approximately 1 – 2 litres of clean water in a bucket.
  3. Add Filter Brite solution into the pump basket. Replace the pump lid.
  4. Put the filter in the backwash position.
  5. Turn the pump on just until it primes and the Filter Brite solution moves into the filter.
  6. Turn off the pump and close the valves.
  7. Let the Filter Brite soak in the filter for at least 6 hours and preferably overnight.
  8. Backwash until the discharge is clear.
  9. Return to normal operation.

NOTE: Avoid physical contact with product. Follow safety information on label instructions. Store in a cool, dry place. Keep out of the reach of children.