Product Features:
-
Cellulose filtration aid.
-
Restores water sparkle.
-
Facilitates the removal of metals.
-
Aids the filter in removing tiny particles of dirt, plaster dust, dead algae, pollen, etc.
-
For use with all filter types.
Benefits:
-
Makes water clear and sparkling.
-
Removes metals to prevent staining.
-
Makes filter perform better.
Application Instructions - Sand Filters:
-
Thoroughly backwash filter and return to normal position.
-
Prepare a slurry of Quick Clear in a clean bucket of water according to the dosage rates given in the table below.
-
Pour this slurry through the skimmer with the pump and filter running.
-
Backwash after 24 hours or before then if the filter pressure reaches maximum level.
-
If necessary, repeat treatment until water is clear.
Diameter of Filter | 30 cm (12") | 45 cm (18") | 60 cm (24") | 75 cm (30") | 90 cm (36") | 105 cm (42") | 120 cm (48") |
Level Cups | 1 | 2½ | 4 | 6 | 9 | 13 | 17 |
Application Instructions - DE Filters:
-
Thoroughly backwash filter, clean skimmer basket and hair & lint basket.
-
Set filter to normal position.
-
Prepare a mixture of 1 part Quick Clear and 2 parts DE in a clean bucket of water in sufficient quantity to make up the normal filter charge.
-
Pour this slurry solution through the skimmer with the pump running.
-
Under no circumstances should filter pressure be allowed to exceed that of the manufacturer.
Application Instructions - Cartridge Filters:
-
Remove, clean and replace cartridge.
-
Prepare a slurry in a clean bucket of water adding 1½ cups of Quick Clear per square metre of filter area.
-
Pour this slurry through the skimmer with the pump and filter running.
-
Clean cartridges when pool clears, or if filter pressure reaches manufacturer's recommended maximum.
-
If necessary, repeat treatment until water is clear.
Available Sizes:
-
150-gram bags
NOTE: Avoid physical contact with product. Follow safety information on label Instructions. Keep out of the reach of children.