couple with pool cocktails.png
cheeky girl in pool.png
inner pool children.png

Product Features:

  • 72.7% w/w trichloroisocyanuric acid.

  • 66.0% w/w available chlorine (Cl).

  • Unique co-compacted granular product.

  • Built-in chlorine-tolerant clarifiers.

  • Water-enhancing agents.

  • Skimmer-fed application.

  • Classified as a non-dangerous good.

Benefits:

  • Ensures sparkling clear pool water.

  • Improves filter efficiency.

  • Less skin and eye irritation than many chlorinating products.

  • No need to pre-dissolve.

  • Easy to use.

  • Safer to store and transport.

Application Instructions - General Procedure:

  1. Adjust pH to 7.4 - 7.6.

  2. Slowly add the recommended dosage of Power Chlor into the skimmer with the filter pump running in the normal filtration mode. CAUTION: Never broadcast this product directly into pools with bleachable surfaces, including vinyl, painted, fibreglass or coloured plaster.

  3. Continue to operate the pump for at least 2 - 4 hours following application.

  4. If necessary, repeat from Step 2 until a chlorine residual of 1.5 - 3.0 ppm can be maintained.

Application Instructions - Initial Start-up:

  1. Brush all pool surfaces with the filter pump operating.

  2. Add 120 grams of Power Chlor per 10,000 litres of pool water.

  3. After one hour, test the chlorine residual with a pool test kit or test strip.

  4. Repeat dosage until a chlorine residual of 1.5 – 3.0 ppm is achieved.

Application Instructions - Routine Sanitation:

  1. Add 20 grams of Power Chlor per 10,000 litres of pool water every day or as often as needed to maintain a chlorine residual of 1.5 – 3.0 ppm.

Application Instructions - Shock:

  1. Add 120 grams of Power Chlor per 10,000 litres of pool water.

  2. Do not re-enter the pool until the chlorine residual has returned to 5.0 ppm or less.

Application Instructions - Visible Algae:

  1. With the filter pump operating, brush algae from all pool surfaces.

  2. Add 120 grams of Power Chlor per 10,000 litres of pool water.

  3. If live algae remains after 24 hours, repeat the treatment.

  4. Do not re-enter the pool until the chlorine residual has returned to 5.0 ppm or less.

  5. For best results, use in conjunction with MSA II Algaecide.

Application Instructions - Off-Season Maintenance:

  1. Add 120 grams of Power Chlor per 10,000 litres of pool water as often as is necessary to maintain a chlorine residual of at least 1.0 ppm.

  2. For complete off-season treatment, use in conjunction with Back-Up II Algae Inhibitor.

Available Sizes:

  • 5-kg pails

  • 500-gram bags

  • 10-kg pail

  • 20-kg pail

  • 1-kg bottles

NOTE: Avoid physical contact with product. Do not store near petroleum products. Follow safety information on label Instructions. Store in a cool, dry place. Keep out of the reach of children.