feet by pool.png
man swimming in pool.png
pool bikini.png

SpaGuard Balance Pak 300
raises calcium hardness to help prevent corrosion of equipment and etching of surfaces. Do not use Balance Pak 300 in spas where Perfect Balance is being used.

SpaGuard Balance Pak 300

To use Balance Pak 300:

  1. Perform a complete water analysis and add Balance Pak 300 according to ALEX recommendations. 10 grams per 1,000 litres increases calcium hardness 10 ppm.

  2. Do not pre-dissolve. Broadcast into spa with the circulation running.

  3. CAUTION: Never add more than 1/3 of the required amount of Balance Pak 300 at any one time.  Wait at least 1 hour between thirds.

  4. Brush up any undissolved product.

NOTE: Avoid physical contact with product. Follow safety information on label instructions. Store in a cool, dry place. Keep out of the reach of children.