air mattress in pool.png
woman floating in pool.png
three children in pool.png

SGBalancePak200SpaGuard Balance Pak 200 raises low pH to prevent equipment corrosion, surface damage, and skin and eye irritation.

SpaGuard Balance Pak 200

To use Balance Pak 200:

  1. If the pH drops below 7.4, add Balance Pak 200 directly to the spa with the pump on and aeration off. Determine the amount by performing an alkali demand test in the BioGuard test kit or ALEX recommendations.

  2. Retest and adjust again if necessary.

  • Do not add more than 30 grams per 1,000 litres at one time.

  • If the pH is continually low, test for total alkalinity and adjust if necessary according to ALEX recommendations.

  • Retest pH and adjust if necessary.

  • If controlling the pH is a continual problem, test for total alkalinity and adjust as necessary.

NOTE: Avoid physical contact with product. Follow safety information on label instructions. Store in a cool, dry place. Keep out of the reach of children.