woman in pool with flower.png
pool yoga.png
pool smiling underwater in pool.png


Power Chlor
is a revolutionary patented product that provides an economical source of chlorine for the routine sanitation and periodic oxidation of pools.  The multifunctional co-compacted granules dissolve completely and are designed for use with all types of pool surfaces.  Each Power Chlor granule contains trichlor for killing algae and bacteria, chlorine-tolerant clarifiers for keeping water crystal clear, and water-enhancing agents to provide a silky smooth feel to the water whilst reducing skin and eye irritation.

BioGuard Power Chlor

 

To use Power Chlor - Start-up:

  1. Adjust pH to 7.4 - 7.6.

  2. Slowly pour 120 grams of Power Chlor per 10,000 litres into the skimmer with the pump running in normal filtration mode.

  3. After 1 hour, test the chlorine residual and, if necessary, repeat the dosage until the free chlorine residual is between 1.5 and 3.0 ppm.

  4. If this level is exceeded, do not allow bathers to re-enter the pool until the chlorine residual drops to 5.0 ppm or less.


To use Power Chlor - Routine maintenance:

  1. Adjust pH to 7.4 - 7.6.

  2. Slowly pour 20 grams of Power Chlor per 10,000 litres into the skimmer with the pump running in normal filtration mode.

  3. After 1 hour, test the chlorine residual and, if necessary, repeat the dosage until the free chlorine residual is between 1.5 and 3.0 ppm.

  4. If this level is exceeded, do not allow bathers to re-enter the pool until the chlorine residual drops to 5.0 ppm or less.

To use Power Chlor - Shock:

  1. Slowly pour 120 grams of Power Chlor per 10,000 litres into the skimmer with the pump running in normal filtration mode.

  2. Do not allow bathers to re-enter the pool until the chlorine residual drops to 5.0 ppm or less.

To use Power Chlor - Visible algae:

  1. With the pump running, brush algae from all pool surfaces.

  2. Slowly pour 120 grams of Power Chlor per 10,000 litres into the skimmer with the pump running in normal filtration mode.

  3. If live algae remains after 24 hours, repeat the treatment.

  4. Do not allow bathers to re-enter the pool until the chlorine residual drops to 5.0 ppm or less.

  5. For best results, use in conjunction with MSA II Algaecide.

To use Power Chlor - Off-Season:

  1. Slowly pour 120 grams of Power Chlor per 10,000 litres into the skimmer with the pump running in normal filtration mode.

  2. Repeat as often as is necessary to maintain a chlorine residual of at least 1.0 ppm.

  3. For best results, use in conjunction with Back-Up II Algae Inhibitor.

NOTE: Avoid physical contact with product. Follow safety information on label instructions. Open in well ventilated area. Avoid breathing fumes. Store in a cool, dry place. Keep out of the reach of children.