woman in pool with flower.png
woman floating in pool.png
roughhouse in pool.png

Pool Magnet is a liquid chelating agent that binds iron, copper and manganese in the water to prevent them from being oxidised and staining the pool surface or discolouring the water. Pool Magnet can also help remove fresh stains. When used according to label instructions, Pool Magnet provides remains effective for up to 4 weeks. Note: High chlorine or bromine residuals can break the product down. Do not allow the chlorine or bromine residual to exceed 5.0 ppm for 5 - 7 days after applying Pool Magnet.

BioGuard Pool Magnet

To use Pool Magnet:

Do not add this product if the pool's chlorine or bromine residual exceeds 5.0 ppm. If the pool has been shocked, wait 24 - 48 hours before applying this product to obtain maximum effectiveness.

Backwash the filter, then allow the pump to run continuously. Apply 250 mL of Pool Magnet per 10,000 litres for every 1.0 ppm metals present. Maximum recommended dose is 750 mL per 10,000 litres. Temporary clouding may occur upon addition.

If the pool surface is stained, add Pool Magnet directly over these stains and brush with a stiff-bristled broom or pool brush.  CAUTION: Take care when removing stains from vinyl liners not to pierce the surface.

Allow pool to circulate continuously, ideally for 5 - 7 days. During this time, do not allow the chlorine or bromine residual above 5.0 ppm.

Always use in conjunction with Quick Clear to remove the metals completely from the pool water.

NOTE: Avoid physical contact with product. Follow safety information on label instructions. Store in a cool, dry place. Keep out of the reach of children.