man on side of pool.png
women splashing in pool.png
pool bikini.png
Salt Chlorination Regular Maintenance

Run the pump a minimum of 10 - 12 hours per day to ensure adequate filtration and activity of the Mineral Springs unit.

Once a week:

Test the free chlorine residual and the pH. Maintain free available chlorine residual at 1.5 - 3.0 ppm by adjusting the sanitiser output control on the salt chlorinator. Maintain pH at 7.4 - 7.6. Adjust as needed.

Add 1 bag of Salt Pool Sparkle per 50,000 litres to establish an initial free chlorine residual of 1.5 - 3.0 ppm.

Add 40 mL of Protector Salt Pool Algae Inhibitor per 10,000 litres to prevent algae.

Once a month:

Perform a complete water analysis and balance according to ALEX recommendations.

As needed:

Brush and vacuum the pool, and empty skimmer and pump baskets.

Backwash the filter.

Change the sanitiser output controller for varying sanitiser consumption to prevent over or under-chlorination of water. Maintain 1.5 - 3.0 ppm.

Chemically clean the filter with Filter Brite mid-season or as required.

For normal operation, leave the main switch in the AUTO position.