air mattress in pool.png
child in floaties by pool.png
woman relaxing in pool.png

By combining multiple oxidisers, clarifiers and buffers, BioGuard Lite and Salt Pool Sparkle make the task of cleaning up swimmer wastes easy and simple. This unique, patent pending technology is actually several products in one for maximum convenience and results. This product uses chlorine as one of the oxidisers. By combining the particular compounds of Lite/Salt Pool Sparkle, the results achieved are greater than using chlorine alone at the same dosage rate. While oxidation potential is a measure of the strength of an oxidiser, the activity of any particular oxidiser on any particular molecule can be affected by other factors. By utilising a combination of oxidisers, each specifically well suited to its assigned task, Lite/Salt Pool Sparkle achieves excellent results in removing swimmer wastes and destroying many undesirable compounds. This patent pending technology represents a unique blend of oxidising and clarifying agents for use in chlorine sanitised pools.


The clarifier portion and filtration enhancer portion of the product help to remove particles which are not normally removed by the filter. This allows the oxidising portion of the product to work on just the particles and molecules which are not filterable. With this reduction in what requires oxidation, the combined oxidisers are even more effective. The buffering compounds allow Lite/Salt Pool Sparkle to perform its job without adversely affecting the pH as occurs with most typical oxidisers. There is little to no effect on pH when Lite/ Salt Pool Sparkle is used.

 

The result of this combining of ingredients is a product which provides a method of removing swimmer wastes and restoring sparkle which does not require a high level of chlorine. Because chlorine residuals are kept low, use of this product does not limit time as much as is necessary with traditional chlorine shocks.

 

The recommended use for Lite/Salt Pool Sparkle is weekly application at a rate of 350 grams per 40,000 litres of pool water. This maintenance treatment becomes a replacement for the Step 2 of the 3-Step Program. Because this product is very soluble, dissolving occurs almost instantly under normal swimming pool conditions. This allows direct application and does not require premixing.

 

Lite/Salt Pool Sparkle can be used as the Step 2 of the BioGuard 3-Step Program for simple once a week pool maintenance. Step 3, the application of Back-Up to prevent algae, is now administered each week as well at the rate of 15 mL per 10,000 litres.

  • Weekly application rate of 350 grams per 40,000 litres
  • May be used as Step 2 in 3-Step Program
  • Patent Pending technology
  • Combination of ingredients providing multiple actions

IMPORTANT NOTE: BIOGUARD LITE / SALT POOL SPARKLE IS NOT A SHOCKING COMPOUND. THIS PRODUCT SHOULD NOT BE USED AS A PROBLEM SOLVER. USE BURN OUT OR BURN OUT 35 TO ACHIEVE THE HIGH CHLORINE LEVELS REQUIRED FOR ALGAE OR CHLORINE DEMAND PROBLEMS.

 

The above information is supplied by Bio-Lab and represents its best interpretation of available technical information at the time of preparation. The sole purpose is to supply factual information to Bio-Lab customers. It is not to be taken out of context nor used as support for any other claim not made herein.